DuraLabel 9000 Guia do Utilizador descarregar pdf (Página 21)

SETUP FOR PRINTING WHEN NOT CONNECTED TO A COMPUTER:

3.1.1.1 Speed:

Print Setup 1/12

> Speed

Density

Direction

Speed

Use this option to set print speed. The available print speed is 2 or 3 ips. The

default print speed is 2 ips.

Press key to raise the print speed, and press key to decrease

print speed. Press to accept, and press to cancel.

Note: If printing from enclosed software/driver, the software/driver will send

out the SPEED command, which will overwrite the setting set from the

front panel.

3.1.1.2 Density:

Print Setup 2/12

Speed

> Density

Direction

Density

Use this option to setup printing darkness. The available setting is from 0 to 15, and

the step is 1. Printer default density is 8. You may need to adjust your density

based on selected media.

Press or to increase/decrease the printing darkness. Press

to enable the setting. Press to cancel.

Note: If printing from enclosed software/driver, software/driver will send out

DENSITY command, which overwrites the setting entered from the front

panel.

3.1.1.3 Direction:

Print Setup 3/12

Speed

Density

> Direction

Direction

The direction setting value is either 1 or 0. Use this option to setup the printout

direction. Printer default printout direction is DIRECTION 0.

Press key to set the direction as 1, and to set it as 0, and

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 52 53

Sem comentários

DuraLabel 9000 Guia do Utilizador Página 21